
03 Oct 2026
A IB Group delegation has completed a working visit to the Aktobe Rail and Beam Plant (ARBZ, Kazakhstan), the mill for which our company is the official dealer. The purpose went well beyond a courtesy call: our team followed the production lines on site, walked through the finished-goods warehouse and carried out a pre-delivery check of the batches prepared for Azerbaijan — their marking, their conformity to standards and their visual condition.
ARBZ (in full, Aktyubinsk Rail and Beam Plant LLP) is located in the Aktobe region of Kazakhstan and is one of the few plants across the CIS that produces railway rail alongside a full range of hot-rolled sectional steel. The rolling shop is equipped with modern lines, including Siemens VAI equipment, which keeps the tight tolerances on rail profile geometry and mechanical properties stable from batch to batch.
IB Group is the official dealer of this plant's products on the Azerbaijani market. In practice that means the customer does not buy through a chain of intermediaries, but from a partner working directly with the manufacturer: price, batch volume, certificate package and delivery schedule all sit at a single point of responsibility.
The delegation began in the rail shop. On the cooling bed the next batch — dozens of tonnes of P65 long-length rail — was laid out in bulk. Plant specialists took our team step by step through rolling, straightening, heat treatment and the subsequent geometric inspection.
P65 is the type most widely used on the railways of Azerbaijan and the wider region. Technical details are set out in our railway tracks section; the sample plate at the plant specified the following:
The choice of category is not a formality: the DT350 group denotes heat-strengthened rail and raises wear resistance on lines with high axle loads, dense timetables and numerous curves. Matching the category to the profile of the project directly determines how long the rail will serve — a question we work through with customers as part of our consulting services.
ARBZ's range does not stop at rail. On the sample stands and in the storage yard our team also reviewed the plant's shaped steel group:
| Product | Standard | Note |
|---|---|---|
| Rail P65 | GOST R 51685-2013 / ST RK 2432-2013 | Steel E76F, categories DT350–DT370IK |
| I-beam (sloped inner flange faces) | GOST 8239-89 + GOST 535-2005 | Profile No. 30 inspected |
| I-beam (parallel flange faces) | GOST 26020-83 + GOST 535-2005 | Profile No. 30 inspected |
| Equal-leg angle | GOST 8509-93 + GOST 535-2005 | Profiles No. 100 and No. 125 inspected |
I-beams and angle sections are used well beyond the track itself — in overpasses, warehouse frames, bridge elements and the steel structures of industrial buildings. That is why IB Group offers this group as part of an integrated supply package within our railway construction and project management lines of work.
The most practical part of the visit took place at the finished-goods warehouse. Batches are stored there in bundles, and every bundle carries the plant's official marking plate. Our team checked these plates one by one: they state the manufacturer's details, the standard, the grade, the product name, the profile number and length, the steel grade, the batch number and the production date.
On one of the inspected batches, for example, the plate specified a hot-rolled equal-leg angle of 140×9×12000 mm, steel grade St3sp, grade 1, to GOST 8509-93. These details may look like paperwork, but at the acceptance stage they are decisive: any mismatch between marking and certificate turns into a serious delay at customs and on site.
That is precisely the point of a pre-delivery inspection — to find the problem in the plant's yard, not after the cargo has reached Azerbaijan. The approach is an integral part of our contract support services.
In the open area of the warehouse the team reviewed the storage conditions of angle and channel bundles, the correctness of the dunnage, the quality of the strapping and the surface condition. For hot-rolled products a thin oxide layer on the surface is normal and does not affect quality; what matters is the absence of deformation, bending and mechanical damage. For long-length products the main risk in transport is an incorrect loading and support scheme — which calls for separate control at the shipping stage.
Buying railway material is not an ordinary trading operation. A batch of rail will serve for decades, and its category and quality will determine both the safety of the line and its operating costs. Working with a partner who has seen the plant's production chain first-hand gives the customer three concrete advantages:
IB Group continues to support the development of the region's transport and logistics infrastructure with durable industrial solutions. All photographs from the visit are available in the photo gallery, and our other work can be found in the Projects section.
To request an offer for railway rail, switches and turnouts, fish plates, railway accessories or shaped steel, please get in touch with us.

05 Jun 2026
The supply of railway products to Belarus was discussed within the Belarus-Azerbaijan Business Forum.

05 Jun 2026
IB Group took part in the Belarus-Azerbaijan Business Forum, with a focus on the railway sector.

29 Jun 2024