About usProductsServicesProjectsCareerNewsBlogVideosGallery
  • About us
  • Products
  • Services
  • Projects
  • Career
  • Media
Contact us

IB Group acts as a key strategic partner in the region, providing high-quality products and services in the railway, energy, and oil and gas sectors. The company supports sustainable development by offering innovative solutions in compliance with global standards.

About us
  • About company
  • Our partners
  • Career
  • News
Products
    Services
      Projects
        Contact us
        • + 994 (99) 274 99 99+ 994 (12) 436 52 10
        • [email protected]
        • Babek Plaza floor 11, Baku, Azerbaijan
        Privacy Policy

        ©2026. All rights reserved - IB GROUP OF COMPANIES

        Website development—ONE studioHosting—Best Host
        • IB Group
        • Products
        • Railway Switches & Turnouts

        Railway Switches & Turnouts

        Supply of high-quality railway turnouts and switch products for mainline, industrial and urban railways, compliant with GOST and EN standards.

        Supply of railway turnouts

        IB Group supplies the full range of railway switches, turnouts and related permanent-way products for mainline, industrial and urban railways. In partnership with leading manufacturers, we deliver products compliant with GOST and EN standards for Azerbaijan Railways, metro, tram, port and industrial projects.

        All products undergo non-destructive testing (NDT) and are manufactured at plants certified to ISO 9001, ISO 14001 and OHSAS 18001. The main product range is listed below with its EN and GOST standard parameters.

        Railway Turnout

        A railway turnout is the key permanent-way assembly that guides a train from one track to another. We supply the full range of ordinary, curved and symmetric turnouts for mainline, station and industrial tracks. The crossing is manufactured from cast manganese steel or as a rail-bound assembly.

        Applications: Mainline and station tracks, industrial and port infrastructure, metro and tram lines.

        • EN Standards
        • GOST Standards
      • Standard
      • EN 13232

      • Rail profile
      • 49E1, 54E1, 60E1

      • Track gauge
      • 1435 mm

      • Crossing angle / mark
      • 1:9, 1:12, 1:14

      • Crossing steel
      • Cast Mn13 (austenitic manganese)

      • Type
      • Assembled / rail-bound

      • Banner
        Banner
        Banner

        Crossover

        A crossover connects two parallel tracks in both directions and consists of four turnouts. It is used where space is limited, such as station throats and depots.

        Applications: Station throats, depots, industrial junctions.

        • EN Standards
        • GOST Standards
      • Standard
      • EN 13232

      • Rail profile
      • 49E1, 54E1, 60E1

      • Track gauge
      • 1435 mm

      • Crossing angle / mark
      • 1:9

      • Crossing steel
      • Cast Mn13

      • Type
      • Double crossover

      • Banner
        Banner
        Banner

        Single Crossover

        A single crossover links two parallel tracks in one direction and consists of two turnouts. It is used where a simple connection between tracks is required.

        Applications: Station tracks, industrial and port lines.

        • EN Standards
        • GOST Standards
      • Standard
      • EN 13232

      • Rail profile
      • 49E1, 54E1, 60E1

      • Track gauge
      • 1435 mm

      • Crossing angle / mark
      • 1:9, 1:11

      • Crossing steel
      • Cast Mn13

      • Type
      • Single crossover

      • Banner
        Banner
        Banner

        Diamond Crossing

        A diamond crossing is where two tracks intersect at the same level. It is available with fixed or movable crossings and is manufactured from cast manganese steel.

        Applications: Station throats, tram networks, industrial junctions.

        • EN Standards
        • GOST Standards
      • Standard
      • EN 13232-5

      • Rail profile
      • 49E1, 54E1, 60E1

      • Track gauge
      • 1435 mm

      • Crossing angle / mark
      • 1:9, 2:9

      • Crossing steel
      • Cast Mn13

      • Type
      • Fixed / movable crossing

      • Banner
        Banner
        Banner

        Expansion (Equalizing) Joint

        An expansion joint compensates for the thermal movement of continuously welded rail (CWR) and bridge transitions, relieving rail stress.

        Applications: Bridges, viaducts, long continuously-welded rail sections.

        • EN Standards
        • GOST Standards
      • Standard
      • EN 13232 / EN 13674

      • Rail profile
      • 54E1, 60E1

      • Track gauge
      • 1435 mm

      • Displacement range
      • ± 100–600 mm

      • Crossing steel
      • R260, R350HT

      • Type
      • Expansion joint

      • Banner
        Banner
        Banner

        Derailing (Releasing) Switch

        A derailing switch is a safety device that prevents a runaway wagon from reaching the mainline by intentionally derailing it.

        Applications: Station safety systems, industrial and depot tracks.

        • EN Standards
        • GOST Standards
      • Standard
      • EN 13232

      • Rail profile
      • 49E1, 54E1, 60E1

      • Track gauge
      • 1435 mm

      • Actuation
      • Manual / electric / interlocked

      • Crossing steel
      • R260

      • Type
      • Derailing switch

      • Banner
        Banner
        Banner

        Portable Retarder / Shoe Discharger

        A portable retarder / shoe discharger is used at marshalling humps and shunting tracks to control and stop wagon speed.

        Applications: Marshalling (hump) yards, shunting and sorting tracks.

        • EN Standards
        • GOST Standards
      • Standard
      • EN 13232

      • Rail profile
      • 49E1, 54E1, 60E1

      • Track gauge
      • 1435 mm

      • Material
      • Steel + hardened elements

      • Type
      • Portable / stationary

      • Application
      • Shunting / marshalling

      • Banner
        Banner
        Banner

        Turnout Components

        Spare parts and components for turnouts: cast manganese crossings (frogs), forged switch (tongue) rails, base plates, heel and distance blocks, brackets and clamps.

        Applications: Manufacturing, repair and upgrade of turnouts.

        • EN Standards
        • GOST Standards
      • Standard
      • EN 13232 / EN 15689

      • Crossing
      • Cast Mn13

      • Tongue rail steel
      • 60E1 / 54E1, R350HT

      • Cast parts
      • Base plates, heel/distance blocks

      • Rail profile
      • 49E1, 54E1, 60E1

      • Type
      • Spare part

      • Banner
        Banner
        Banner

        Share

        Frequently Asked Questions

        IB Group supplies eight permanent-way assemblies for mainline, industrial and urban railways, built to EN 13232 or GOST 33535-2015 and delivered for Azerbaijan Railways, metro, tram, port and industrial projects in partnership with leading manufacturers.

        • Railway turnouts in ordinary, curved and symmetric geometries, for mainline, station and industrial tracks
        • Crossovers built from four turnouts and single crossovers built from two
        • Diamond crossings, where two tracks intersect at the same level, with fixed or movable crossings
        • Expansion (equalizing) joints for continuously welded rail and bridge transitions
        • Derailing switches, portable retarders and shoe dischargers for shunting and station safety
        • Turnout components: cast manganese crossings, forged switch rails, base plates, heel and distance blocks, brackets and clamps

        Installation is covered by our railway construction service, and joints on site can be welded with a rail welding machine from the same supply package.

        IB Group supplies turnouts to both standard families, and the track gauge decides which one applies: EN 13232 turnouts are built for 1435 mm gauge with 49E1, 54E1 and 60E1 rail profiles and crossing marks of 1:9, 1:12 and 1:14, while GOST 33535-2015 turnouts are built for 1520 mm gauge with R50 and R65 profiles and marks of 1/9 and 1/11.

        Diamond crossings follow EN 13232-5 or GOST 7370 / GOST 33535, and spare parts are produced to EN 13232 / EN 15689 or GOST 7370 / GOST 33535. The crossing metal differs with the system as well: cast Mn13 in the EN range against 110G13L to GOST 7370 in the GOST range. Which set applies is fixed by the design code of the infrastructure owner, and the profiles then have to correspond to the railway rails already laid in the adjoining plain track.

        Crossings in IB Group turnouts are produced from austenitic cast manganese steel — Mn13 in the EN range and 110G13L to GOST 7370 in the GOST range — the material used where wheels transfer across the gap and impact loading is highest. Depending on the design, the crossing is supplied as a cast rigid unit or as a rail-bound assembled construction.

        Switch (tongue) rails are forged from rail steel: 60E1 or 54E1 in grade R350HT under EN 13232 / EN 15689, or R65 and R50 under GOST 7370 / GOST 33535. Derailing switches use R260 rail steel, and expansion joints R260 or R350HT under EN and 110G13L or plain rail steel under GOST. Base plates, heel and distance blocks, brackets and clamps complete the assembly and are stocked as spare parts alongside other railway accessories.

        Each assembly in the IB Group turnout range has its own place in the layout: turnouts go into mainline and station tracks, industrial and port infrastructure, and metro and tram lines; crossovers and single crossovers are used in station throats, depots and industrial junctions where space is limited; diamond crossings sit where two tracks cross at the same level, in station throats, tram networks and industrial junctions.

        Expansion joints are installed on bridges, viaducts and long continuously-welded rail sections. Portable retarders and shoe dischargers work on marshalling (hump) yards and sorting tracks, while derailing switches protect station safety systems, industrial and depot tracks. Deliveries serve Azerbaijan Railways, metro, tram, port and industrial projects, including line renewals of the scale of the Sumgayit-Yalama railway reconstruction.

        The crossing angle, or mark, governs how sharply the diverging route leaves the main track, and IB Group supplies marks of 1:9, 1:12 and 1:14 under EN 13232 and 1/9 and 1/11 under GOST 33535-2015. Flatter marks such as 1:12, 1:14 and 1/11 are used on mainline and station tracks, while 1:9 and 1/9 fit shorter layouts where available space is the constraint.

        Crossovers are normally assembled with 1:9 under EN or 1/9 and 1/11 under GOST, because they are installed in station throats and depots. Diamond crossings use the marks 1:9 and 2:9 under EN and 2/11 and 2/9 under GOST. Ordinary, curved and symmetric geometries are available in addition, so the assembly can be adapted to an existing layout rather than the layout being redrawn around a standard turnout.

        IB Group matches each turnout to the existing track from three parameters: gauge, rail profile and the way the ends are connected. On 1520 mm gauge the assembly is built for R50 or R65, corresponding to the railway rails in the adjoining track; on 1435 mm gauge it is built for 49E1, 54E1 or 60E1.

        The ends are then either bolted with railway fish plates or welded into the continuous rail. Where the turnout sits inside a long welded section or on a bridge approach, an expansion joint with a displacement range of ± 100–600 mm takes up the thermal movement and relieves the stress in the rails. Crossing mark, hand and crossing type — cast rigid or rail-bound — are confirmed against the layout drawing before manufacture begins.

        All turnout products undergo non-destructive testing (NDT) and are manufactured at plants certified to ISO 9001, ISO 14001 and OHSAS 18001, in partnership with leading manufacturers of permanent-way equipment. NDT is applied to the components that take the highest wheel impact, above all the cast manganese crossings and the forged switch rails.

        Deliveries are documented against the standard the assembly was built to — EN 13232 and its parts, EN 15689, GOST 33535-2015 or GOST 7370 — so that gauge, rail profile, crossing mark and crossing steel can all be checked against the project design before installation begins. Where a project calls for a wider inspection scope, it is agreed with the manufacturer during technical clarification, before the order enters production, and the agreed scope is reflected in the delivery documents.

        A turnout quotation from IB Group needs five parameters: track gauge (1435 mm or 1520 mm), the rail profile in the existing track (49E1, 54E1, 60E1 or R50, R65), the crossing mark (1:9, 1:12, 1:14, 1/9 or 1/11), the hand of the turnout, and the standard the project follows, EN 13232 or GOST 33535-2015. Send those through the contact page and our engineers will confirm the configuration and propose the crossing type — cast Mn13 or 110G13L, fixed or movable.

        Delivery and installation terms are agreed per order at the quotation stage, according to configuration and destination. Spare parts such as crossings, switch rails, base plates and distance blocks are quoted separately for repair and upgrade programmes, using the same set of parameters.

        Other products

        Railway tracks

        Modern solutions for railway infrastructure. High-quality production that meets international standards. The perfect choice for safety and durability in railway transportation.

        Railway tracks
        Fish Plates

        Fish plates provide modern solutions to ensure the safety and durability of railway tracks. Manufactured in compliance with international standards and high-quality requirements, fish plates deliver maximum performance and resilience in regional and international railway projects.

        Fish Plates
        Railway Accessories

        High-Quality Railway Accessories for Modern Rail Systems

        Railway Accessories
        Rare Earth

        Strategic elements for industry and technology.

        Rare Earth