About usProductsServicesProjectsCareerNewsBlogVideosGallery
  • About us
  • Products
  • Services
  • Projects
  • Career
  • Media
Contact us

IB Group acts as a key strategic partner in the region, providing high-quality products and services in the railway, energy, and oil and gas sectors. The company supports sustainable development by offering innovative solutions in compliance with global standards.

About us
  • About company
  • Our partners
  • Career
  • News
Products
    Services
      Projects
        Contact us
        • + 994 (99) 274 99 99+ 994 (12) 436 52 10
        • [email protected]
        • Babek Plaza floor 11, Baku, Azerbaijan
        Privacy Policy

        ©2026. All rights reserved - IB GROUP OF COMPANIES

        Website development—ONE studioHosting—Best Host
        • IB Group
        • Blog
        • Industrial Valves for Oil and Gas: Types, Standards and How to Specify Them
        Industrial Valves for Oil and Gas: Types, Standards and How to Specify Them

        Industrial Valves for Oil and Gas: Types, Standards and How to Specify Them

        07 Sep 2026

        In a process plant a valve does one of four jobs — isolation, regulation, non-return or pressure protection — and asking one family to do another's job is the most common and most expensive specification error on a line. Industrial valves for oil and gas are chosen from the fluid, the design pressure, the temperature range and the connection type long before a brand is discussed. This guide covers the valve families and where each belongs, how pressure and temperature drive the choice between carbon and stainless steel bodies, what API 6D, EN 12516, EN 593 and GOST 33259 actually govern, and what to put in an enquiry so the quotation comes back right the first time.

        What a valve has to do in a process line

        Every valve on a P&ID exists for a defined duty, and naming that duty eliminates most of the catalogue before a single dimension is discussed.

        • Isolation (on/off). Fully open or fully closed, sealing tightly when shut and adding almost no pressure drop when open — block valves at battery limits and around equipment that must be taken out of service.
        • Regulation (throttling). A stable partial opening with a predictable position-to-flow relationship. Throttling loads the seat continuously, which is why an isolation valve pressed into control duty later leaks when closed.
        • Non-return. Flow in one direction only, closing on reversal without operator action and protecting pumps and compressors after a trip.
        • Safety and pressure protection. Automatic opening at a set pressure and reseating afterwards — sized to a specific relief case, not a general-purpose fitting.

        Splitting these duties across the right devices keeps a line both tight and controllable over a long service life — the same logic that governs selection of the oil, gas and industrial pipelines the valves sit in.

        The main valve families and where each belongs

        The families below are described generically, as used across refinery, petrochemical and energy service. The types, sizes and ratings available for a given project — including the oil-gas and industrial valves supplied by IB Group — are confirmed per enquiry.

        FamilyPrimary dutyStrengthsWatch-outs
        GateIsolationVery low pressure drop, tight shut-offSlow to operate; partial opening erodes the seat
        BallIsolationQuarter-turn, low torque, easy to actuateSeat material sets the temperature limit
        ButterflyIsolation, coarse regulationCompact and light, economical in large sizesDisc obstructs the bore; seat design decides performance
        GlobeRegulationGood throttling characteristic, repairable seatHigher pressure drop even when fully open
        CheckNon-returnAutomatic; protects rotating equipmentSensitive to orientation and to very low flow
        Safety / reliefPressure protectionOpens at set pressure, independent of controlsMust be sized to a relief case and tested periodically

        How pressure class and temperature range drive body material

        Two numbers govern the body: the pressure it must contain and the temperature at which it must contain it. Steel loses strength as temperature rises, so a pressure rating only means something quoted together with a temperature. The Babcock valves in IB Group's range are specified for a maximum pressure of up to 100 bar (10 MPa) across −50 °C to +450 °C, with bodies in carbon steel or stainless steel — an envelope that covers high-pressure boiler systems, energy and heat-exchange processes, oil and gas processing plants, and chemical and heavy industrial operations.

        ConsiderationCarbon steel bodyStainless steel body
        Typical serviceHydrocarbons, steam, water, non-corrosive streamsCorrosive, chemically aggressive or purity-sensitive media
        Corrosion behaviourDepends on coating and external protectionPassive oxide layer resists attack unaided
        Low-temperature serviceNeeds a grade qualified for the low end of the rangeAustenitic grades keep toughness at low temperature
        Cost positionLower material cost at the same rating and sizeHigher cost, repaid by service life in aggressive duty

        Trim and seat materials deserve the same attention as the body: a body rated to +450 °C means little behind a soft seat that is not, because the assembly defines the operating envelope. Body, pipe and gasket materials should form one system, which is why valve and pipe specifications are reviewed together rather than bought in isolation — as in the pipeline and valve supply for the Heydar Aliyev Oil Refinery.

        Flanged or welded: choosing the connection type

        Babcock valves are available with flanged and welded connections, and the choice is an operating decision as much as an engineering one.

        Flanged connections

        A flanged valve is bolted between mating flanges with a gasket between them, so it can be removed for maintenance without cutting the pipe — the default wherever the valve will be serviced. The trade-off is a bolted joint: a leak path needing the right gasket, correct bolt loading and periodic checking. Always state the flange standard, rating and face type, because a valve with the wrong drilling cannot be installed however correct its pressure rating is.

        Welded connections

        A welded valve becomes part of the pipe. With no bolted joint there is no gasket to age, which makes welded ends the usual answer for high-pressure service, hazardous media and buried or inaccessible lines. The cost is maintainability: removal means cutting and re-welding, with qualified procedures and non-destructive testing. Welded ends also require the valve wall thickness to match the pipe schedule — another reason to specify valves and pipes as one package.

        What API 6D, EN 12516, EN 593 and GOST 33259 govern

        Standard codes are often read as a general quality badge. In fact each governs a defined aspect of the valve, and citing the right combination is what makes two offers comparable.

        StandardWhat it governsWhy it matters to a buyer
        API 6DPipeline and piping valves: design, manufacture, marking, testing, documentationThe reference framework for pipeline-service valves and their traceability
        EN 12516Shell design strength — how the pressure-containing body is verified, by calculation or testConfirms the body is engineered to hold the stated pressure, not merely stamped with it
        EN 593Metallic butterfly valves: requirements and testsMakes butterfly offers comparable on seat performance and testing, not price alone
        GOST 33259Flanges for pipe fittings and pipelines: types, design, dimensionsDefines the flanged interface so the valve bolts up to GOST-designed pipework
        GOST 35622Cited on the Babcock specification within the GOST frameworkUnder GOST procurement, confirm the applicable edition and scope at enquiry stage

        Projects in Azerbaijan and the CIS frequently sit on the boundary between the EN/API world and the GOST world — a plant built to GOST being extended to EN, or the reverse. Reconciling the two is a documentation exercise as much as a technical one, normally handled alongside contract support services so that standards, inspection regime and certificates are written into the contract rather than argued about on delivery.

        A specification checklist to send with your enquiry

        Most requotes are caused by missing information, not by price. Sending the following with a first enquiry usually removes a whole round of correspondence:

        • Duty — isolation, regulation, non-return or safety, and normally open or normally closed.
        • Fluid — medium, phase, and anything corrosive or abrasive in the stream.
        • Design and operating pressure and temperature, including the minimum ambient temperature at site.
        • Size and connection — nominal diameter; flanged or welded; flange standard, rating and face type, or the matching pipe schedule and wall thickness.
        • Body, trim and seat materials, or the process conditions they should be derived from.
        • Standard framework — API, EN or GOST — plus the inspection, testing and certification documents required.
        • Actuation — manual, or actuated with the available power supply and control signal.
        • Quantity, delivery point and project schedule, so supply can be planned against the construction programme.

        On larger packages the valve list rarely travels alone: it arrives with a pipe list, a schedule of machinery and equipment and a construction sequence that dictates what must be on site first. Coordinating those into one supply plan is what project management services exist to do, and it is how pipeline packages such as the Azərkimya pipeline renewal are organised. If you have a valve list or a set of process conditions to price, send it to the IB Group team and the available range will be confirmed against those conditions.

        Frequently asked questions

        What types of industrial valves are used in oil and gas?

        Oil and gas installations use a small number of families, each matched to a duty. Gate and ball valves handle isolation, where the requirement is tight shut-off and almost no pressure drop when open. Globe valves handle regulation, because they hold a stable partial opening. Butterfly valves cover isolation and coarse regulation in larger diameters. Check valves prevent reverse flow, and safety or relief valves protect against overpressure. Start from the duty and the process conditions rather than the valve type: once duty, pressure, temperature and fluid are fixed, the family largely selects itself.

        What pressure and temperature can IB Group's industrial valves handle?

        The Babcock valves in IB Group's oil-gas and industrial valve range are specified for a maximum pressure of up to 100 bar, stated as 10 MPa under the GOST framework, across a temperature range of −50 °C to +450 °C. Bodies are available in carbon steel and stainless steel, with flanged and welded connections. That envelope covers high-pressure boiler systems, energy and heat-exchange processes, oil and gas processing plants, and chemical and heavy industry. Trim and seat materials also limit the envelope, so the exact configuration for your conditions is confirmed per enquiry.

        Should I choose a carbon steel or a stainless steel valve body?

        The deciding factor is the fluid and the environment rather than the pressure. Carbon steel is the economical choice for hydrocarbons, steam, water and other non-corrosive streams, normally protected externally by coating or insulation. Stainless steel is specified where the medium is corrosive or chemically aggressive, where product purity matters, or where low-temperature toughness is needed. Carbon steel is cheaper at the same rating and size, while stainless steel repays its price through service life in aggressive duty. Body, trim, gasket and pipe materials should be selected as one system.

        When should valves be flanged and when should they be welded?

        Choose flanged ends when the valve will be maintained, replaced or removed during the plant's life: it unbolts without cutting the pipe, at the cost of a gasketed joint that must be correctly loaded and checked. Choose welded ends for high-pressure service, hazardous or emission-sensitive media, and buried or inaccessible lines, where removing the bolted joint removes the leak path. Welded valves need qualified welding procedures and non-destructive testing, and the wall thickness must match the pipe schedule, so they are specified together with the piping.

        Do API, EN and GOST valve standards mean the same thing?

        No — they are separate frameworks, and each code governs a specific aspect. API 6D addresses pipeline and piping valves, including testing and documentation for pipeline service. EN 12516 governs the strength of the pressure-containing shell, while EN 593 sets requirements and tests for metallic butterfly valves. GOST 33259 defines flange types and dimensions, which is what makes a GOST-designed line bolt together correctly. Projects in Azerbaijan and the CIS often mix frameworks, so the accepted standards and certificate list should be written into the contract before manufacturing starts.

        Other articles

        API 5CT Casing and Tubing: A Buyer's Guide to the Standard

        13 Sep 2026

        API 5CT Casing and Tubing: A Buyer's Guide to the Standard

        What API 5CT actually covers, why threads sit in API 5B, where API 5L begins, how J55 to P110 grades read, how LTC, BTC, EUE and premium connectors differ, and what to require on delivery.

        Fish Plate in Railway: Function, Sizes, Weights and Steel Grades

        10 Sep 2026

        Fish Plate in Railway: Function, Sizes, Weights and Steel Grades

        What a fish plate in railway track does, how the double-headed section clamps a rail joint, 1R65 and 2R65 sizes and weights, EN versus GOST steel grades, and how to match a plate to your rail profile.

        Oil and Gas Piping Supply: How to Choose the Right Pipe

        07 Sep 2026

        Oil and Gas Piping Supply: How to Choose the Right Pipe

        Six pipe families, three standard systems and one purchase order. A practical guide to oil and gas piping supply — boiler, OCTG, seamless, coated and insulated pipe — and what a complete enquiry must state.