About usProductsServicesProjectsCareerNewsBlogVideosGallery
  • About us
  • Products
  • Services
  • Projects
  • Career
  • Media
Contact us

IB Group acts as a key strategic partner in the region, providing high-quality products and services in the railway, energy, and oil and gas sectors. The company supports sustainable development by offering innovative solutions in compliance with global standards.

About us
  • About company
  • Our partners
  • Career
  • News
Products
    Services
      Projects
        Contact us
        • + 994 (99) 274 99 99+ 994 (12) 436 52 10
        • [email protected]
        • Babek Plaza floor 11, Baku, Azerbaijan
        Privacy Policy

        ©2026. All rights reserved - IB GROUP OF COMPANIES

        Website development—ONE studioHosting—Best Host
        • IB Group
        • Blog
        • 60E2 Rail Profile: Weight, Steel Grades and How to Choose
        60E2 Rail Profile: Weight, Steel Grades and How to Choose

        60E2 Rail Profile: Weight, Steel Grades and How to Choose

        01 Sep 2026

        The 60E2 rail profile is a 60 kg/m class flat-bottom rail section: the number gives the nominal mass in kilograms per metre, the letter E marks it as a European profile, and the final digit identifies the variant within that family. In the IB Group range the 60E2 rail weighs 60.34 kg/m, is rolled in EN grades R260 and R350HT to EN 13674-1:2020, and is supplied in 25 to 120 m lengths, or 12.5 to 25 m when ordered against GOST 8161-75. This guide compares it with 60E1, R65 and R50 and explains how the choice is actually made.

        What the 60E2 rail profile designation means

        European rail profiles are named by mass and family. In 60E2, the 60 is the approximate mass per metre, E denotes a European section defined in the EN 13674 series, and the trailing digit separates variants that sit in the same weight class but differ in the detail of the railhead shape. Those head differences change where the wheel makes contact as the head wears, which is why a network standardises on one variant rather than mixing them.

        The GOST system names rails the same way but without the family letter: R65 and R50 are read as roughly 65 kg/m and 50 kg/m sections. A profile designation is therefore the reference that the mill, the fastening supplier and the turnout manufacturer all work from. According to the product data, 60E2 rails are extensively used in the European Union, the Baltic states, the Middle East and North Africa, on high-speed passenger and freight routes, mainline networks and port and industrial infrastructure.

        60E2, 60E1, R65 and R50 compared

        All four profiles in the railway rails range are produced to EN 13674-1:2020 and to GOST 8161-75. What changes between them is mass, available steel grades, standard delivery length and hardness.

        ProfileWeightEN steel gradesGOST steel gradesEN lengthGOST lengthHardness
        R6564.72 kg/mR260, R350HTDT350NN, DT370IK25 – 120 m12.5 – 25 m250 – 400
        60E260.34 kg/mR260, R350HTDT350SS, DT370IK25 – 120 m12.5 – 25 m260 HB
        60E160.21 kg/mR260, R350HTDT350VS, DT370IK25 – 120 m12.5 – 25 m260 HB
        R5051.51 kg/mR200, R220DT260, DT29012 – 36 m12.5 – 25 m200 – 220 HB (EN), 260 – 290 HB (GOST)

        Two things in that table surprise buyers. First, 60E1 and 60E2 are separated by 0.13 kg/m — they are not alternatives on weight grounds, and the choice is a geometry and network-compatibility decision. Second, the same profile carries different hardness figures depending on which standard it is ordered against, because the two systems specify different grades: R50 is quoted at 200 – 220 HB in EN grades R200 and R220, and at 260 – 290 HB in GOST grades DT260 and DT290.

        EN and GOST: two parallel systems for the same rail

        EN 13674-1:2020 and GOST 8161-75 are not a modern standard and an obsolete one, but two live documentary systems: a rail of a given profile can be rolled to either, with three practical consequences.

        • Grade names differ. The EN grades are R200, R220, R260 and R350HT; the GOST grades for the same profiles are DT260, DT290, DT350NN, DT350VS, DT350SS and DT370IK. A specification that mixes the nomenclature will be queried by the mill.
        • Standard lengths differ. R65, 60E1 and 60E2 are supplied in 25 to 120 m under EN and in 12.5 to 25 m under GOST; R50 runs 12 to 36 m under EN against 12.5 to 25 m under GOST.
        • Acceptance documents differ. The certificate follows the standard named in the contract, so name the standard and its edition, not just the profile.

        The length difference is the one with real cost attached: long rails mean fewer joints per kilometre, which changes both the site welding programme and the quantity of joint material in the bill.

        Steel grade and head hardening: where wear governs renewal

        Profile choice fixes how much steel is in the section; grade choice fixes how that steel behaves at the running surface. Standard pearlitic grades such as R260, quoted at 260 HB for 60E1 and 60E2, suit tangent track with moderate traffic. Head-hardened grades — R350HT in the EN system, and the GOST DT350 and DT370 designations — carry a harder railhead to resist wear and rolling contact fatigue, which is why the R65 profile is quoted across a 250 to 400 hardness range depending on grade.

        The grade decision follows the failure mode that actually governs renewal on the line in question. Where wear dominates — sharp curves, heavy axle loads, steep gradients, braking and acceleration zones — a head-hardened grade lengthens the interval between grinding cycles and rail renewal, and the higher price is recovered in possession time not taken. Where traffic is light and the section is largely straight, the standard grade is the rational choice.

        Axle load, speed and traffic density drive the choice

        A heavier profile puts more material into the head, web and foot, raising bending stiffness, spreading the wheel load over more sleepers and leaving more head to be worn away and ground before the rail reaches its wear limit. The decision therefore follows traffic, not preference.

        • R65 at 64.72 kg/m is the heaviest section in the range and is specified for heavy-load, high-speed main lines and high-density traffic routes.
        • 60E2 at 60.34 kg/m is designed for high-speed transport and heavy freight, and is applied to mainline networks as well as port and industrial infrastructure.
        • 60E1 at 60.21 kg/m covers high-speed lines and mainline passenger and freight traffic, and is the more widely established of the two 60 kg/m variants.
        • R50 at 51.51 kg/m is intended for medium-load track and passenger services on regional and mainline routes. Its section is 152 mm high with a 70 mm head width, a 132 mm base width and a 16 mm web.

        When an existing line is renewed, the decisive question is usually not which profile is best in the abstract but which profile the rest of the infrastructure already assumes: changing it means changing fastenings, joint material and turnout components at the same time.

        Everything else in the track must match the profile

        A rail profile is the anchor for the whole superstructure order. Railway fish plates are profile-specific: the 1R65 plate connects R65 rails and the 2R65 plate connects R65 and R75 rails, and neither seats correctly on a different section. Switches and turnouts are manufactured for a stated rail profile, so a change of rail changes the turnout order with it. Clips, anchors, tie plates and rubber pads from the railway accessories range are sized to the rail foot, and the rail welding machines used to form continuous welded rail must be set up for the section being joined. Specify the profile once, at the start, and the rest of the package follows.

        What a buyer must fix in a rail specification

        An enquiry that can be quoted without a round of clarifications states the profile designation, the governing standard and its edition, the steel grade in that standard's nomenclature, the delivery length, the quantity in metres or tonnes, and the hardness or head-hardening requirement where wear governs the renewal cycle. It should also say whether the rails will be welded into continuous welded rail on site or laid as bolted track, since that determines the joint material and the welding programme.

        Pricing, delivery schedules and packing are confirmed per order at the quotation stage, since they depend on profile, grade, length and destination. Where a project needs more than materials, the railway construction service covers installation, technical support and consultancy alongside supply, as in the Sumgayit-Yalama railway reconstruction. Send the profile, the standard and the tonnage through the contact page and the specification can be checked before the purchase order is issued.

        Frequently asked questions about rail profiles

        What does the 60E2 rail profile designation mean?

        It identifies a flat-bottom rail of the 60 kg/m class defined in the EN 13674 series. The 60 is the approximate mass per metre, the E marks a European profile, and the final digit separates variants within the same weight class that differ in railhead geometry. The 60E2 rail supplied by IB Group weighs 60.34 kg/m and is produced to EN 13674-1:2020 in grades R260 and R350HT, or to GOST 8161-75 in grades DT350SS and DT370IK.

        What is the difference between 60E1 and 60E2 rails?

        Very little in mass and a great deal in compatibility. 60E1 weighs 60.21 kg/m and 60E2 weighs 60.34 kg/m, both are quoted at 260 HB, and both are available in EN grades R260 and R350HT in 25 to 120 m lengths. They differ in railhead geometry and in the GOST grade offered — DT350VS for 60E1 and DT350SS for 60E2 — so the deciding factor is which variant the network, its turnouts and its fastenings already use.

        How much does a 60E2 rail weigh per metre?

        60.34 kg/m. For comparison, 60E1 weighs 60.21 kg/m, R65 weighs 64.72 kg/m and R50 weighs 51.51 kg/m. Rails are ordered by length but shipped by mass, so the per-metre figure converts route length into tonnage: a kilometre of single track uses two rail lines, so roughly 120.7 tonnes of 60E2 rail per kilometre before fastenings, joint material and accessories are added.

        Should I specify R260 or a head-hardened grade?

        It depends on what ends the rail's life. R260 is the standard pearlitic grade and is appropriate for tangent track with moderate traffic. Head-hardened grades such as R350HT in the EN system, or the DT350 and DT370 designations under GOST, resist wear and rolling contact fatigue on sharp curves, heavy-haul routes, gradients and braking zones, where a harder head lengthens the interval between grinding and renewal.

        Do EN and GOST rails come in different lengths?

        Yes, and it matters for planning. Under EN 13674-1:2020 the R65, 60E1 and 60E2 profiles are supplied in 25 to 120 m lengths, while under GOST 8161-75 the same profiles come in 12.5 to 25 m. R50 runs 12 to 36 m under EN and 12.5 to 25 m under GOST. Longer rails mean fewer joints and fewer site welds per kilometre, which affects both the welding programme and the quantity of fish plates and bolts required.

        Other articles

        API 5CT Casing and Tubing: A Buyer's Guide to the Standard

        13 Sep 2026

        API 5CT Casing and Tubing: A Buyer's Guide to the Standard

        What API 5CT actually covers, why threads sit in API 5B, where API 5L begins, how J55 to P110 grades read, how LTC, BTC, EUE and premium connectors differ, and what to require on delivery.

        Fish Plate in Railway: Function, Sizes, Weights and Steel Grades

        10 Sep 2026

        Fish Plate in Railway: Function, Sizes, Weights and Steel Grades

        What a fish plate in railway track does, how the double-headed section clamps a rail joint, 1R65 and 2R65 sizes and weights, EN versus GOST steel grades, and how to match a plate to your rail profile.

        Industrial Valves for Oil and Gas: Types, Standards and How to Specify Them

        07 Sep 2026

        Industrial Valves for Oil and Gas: Types, Standards and How to Specify Them

        Which valve family fits which duty, how pressure and temperature decide between carbon and stainless steel bodies, what API 6D, EN 12516, EN 593 and GOST 33259 govern, and the checklist to send with an enquiry.