About usProductsServicesProjectsCareerNewsBlogVideosGallery
  • About us
  • Products
  • Services
  • Projects
  • Career
  • Media
Contact us

IB Group acts as a key strategic partner in the region, providing high-quality products and services in the railway, energy, and oil and gas sectors. The company supports sustainable development by offering innovative solutions in compliance with global standards.

About us
  • About company
  • Our partners
  • Career
  • News
Products
    Services
      Projects
        Contact us
        • + 994 (99) 274 99 99+ 994 (12) 436 52 10
        • [email protected]
        • Babek Plaza floor 11, Baku, Azerbaijan
        Privacy Policy

        ©2026. All rights reserved - IB GROUP OF COMPANIES

        Website development—ONE studioHosting—Best Host
        • IB Group
        • Blog
        • API 5CT Casing and Tubing: A Buyer's Guide to the Standard
        API 5CT Casing and Tubing: A Buyer's Guide to the Standard

        API 5CT Casing and Tubing: A Buyer's Guide to the Standard

        13 Sep 2026

        API 5CT casing and tubing is the specification that governs the steel pipe which lines a well and carries production to surface: what grades may be used, what dimensions and tolerances apply, what mechanical properties the pipe must meet and how it is tested and marked. It does not govern the threads on the ends of that pipe — those belong to API 5B — and it does not cover the pipeline running away from the wellhead, which is API 5L. This guide explains the split from a buyer's point of view, so that an enquiry names the right standard for the right part of the job.

        IB Group supplies OCTG to API 5CT and ISO 11960 in Ø10–406 mm with wall thicknesses of 5–25 mm, in grades J55, K55, N80 and P110, with BTC, EUE and premium connectors; the GOST line to GOST 632-80 and GOST 633-80 covers Ø20–406 mm, 6–20 mm wall, grades X52, X56 and X65 with LTC and BTC connectors. Both sit on the oil-gas and industrial pipelines page.

        What API 5CT casing and tubing covers

        API 5CT is the casing and tubing specification, published in parallel as ISO 11960 — the two are the same technical document in different clothes, which is why suppliers quote them together. Casing is the pipe that lines the borehole and is cemented in place to support the wall and isolate formations. Tubing is the smaller string run inside the casing through which oil or gas is produced. The specification sets out grade groups and their chemistry, heat treatment requirements, mechanical properties, dimensions, wall tolerances and mass, hydrostatic testing, non-destructive examination, and the marking that ties a length of pipe back to its heat.

        What it does not do is tell you which grade your well needs. That comes from the load case — burst, collapse, axial tension and, where hydrogen sulphide is present, resistance to sulphide stress cracking, which can rule out the strongest grades outright.

        Reading an API grade code

        An API grade is a letter followed by a number. The number is the specified minimum yield strength in ksi: J55 and K55 have a minimum yield of 55,000 psi, N80 has 80,000 psi and P110 has 110,000 psi. The letter identifies the grade family — its chemistry, heat treatment and the testing regime that goes with it — rather than the strength. J55 and K55 share a yield figure but differ in impact requirements, which is exactly the kind of distinction a purchase order must not blur.

        Higher is not automatically better. Strength is bought at the cost of toughness and of sour-service tolerance, and a P110 string in the wrong well is a more expensive way to fail than an N80 string in the right one.

        API 5CT, 5B, 5L and 6D at a glance

        StandardGovernsDoes not governWhere it appears
        API 5CT / ISO 11960Casing and tubing: grades, chemistry, mechanical properties, dimensions, testing, markingThread form and gauging; line pipeWell construction and completion
        API 5BThreading, gauging and thread inspection for casing, tubing and line-pipe threadsPipe body material or gradeConnection acceptance, gauge records
        API 5LLine pipe for the transport of oil, gas and waterDownhole strings; OCTG connectorsGathering, transmission and plant lines
        API 6DPipeline valvesPipe of any kindIsolation and flow control on the line
        GOST 632-80 / 633-80Casing and couplings (632-80); tubing and couplings (633-80)API grade definitionsLegacy and CIS-specified wells

        API 5B: why threads are a separate standard

        A connection is a mechanical interface, not a material, so it is written up separately. API 5B covers the dimensions of round and buttress thread forms — taper, lead, thread height and profile — and, critically, the gauging practice that verifies them: master gauges, working gauges and the standoff measurement that accepts or rejects a cut thread.

        This is why a pipe body can meet API 5CT and the string can still leak or gall. Grade controls the pipe; gauging controls the joint. On an enquiry the two should be stated separately — grade and wall from 5CT, connector type and its gauging record from 5B — and on a tender they should be inspected separately too, which is a point worth confirming with consulting services before the technical annex is fixed.

        Where API 5L fits

        Once fluid leaves the wellhead it travels in line pipe, and line pipe is API 5L. The distinction matters commercially because the standards use different grade systems: an API 5L grade such as X65 is defined by minimum yield in ksi for a line-pipe product, while an OCTG grade such as N80 belongs to the casing and tubing world. IB Group's pipes for oil, gas, energy and chemical projects are manufactured in compliance with API 5L, EN and GOST, and the valves that isolate those lines are supplied to API 6D and equivalent standards.

        Connectors: LTC, BTC, EUE and premium

        Connector choice deserves as much attention as grade: the connection is usually the weakest point of the string in tension and the likeliest leak path in gas service.

        ConnectorTypeCharacterTypical use
        LTCLong round thread casingAPI round thread; seal depends on thread compound; economicalModerate-load casing strings
        BTCButtress thread casingSquare-shouldered load flank, higher tension and compression capacityDeeper or more heavily loaded casing
        EUEExternal upset end tubingUpset ends restore section at the joint, so the connection is not the weak pointProduction tubing strings
        PremiumProprietaryMetal-to-metal seal, gas-tight, defined by the licensor rather than by API 5BHigh-pressure, gas and deviated wells

        Premium connections are proprietary, so their acceptance criteria come from the licensor's specification. If a project mixes API and premium connections, that interface has to be written into the contract rather than assumed — one reason contract support services belong in the procurement stage.

        GOST 632-80 and 633-80 alongside API

        In Azerbaijan and across the CIS, many wells and plants were specified to GOST, and the two systems still meet on the same site. GOST 632-80 covers casing and its couplings; GOST 633-80 covers tubing and its couplings. Their grade designations, testing regimes and tolerances follow their own logic, so a GOST grade is never a drop-in replacement for an API grade — equivalence tables are a starting point for discussion with the engineer of record, not a substitute for one. IB Group's GOST OCTG line is supplied with LTC and BTC connectors in grades X52, X56 and X65, which keeps a legacy string serviceable without forcing a system change. Handling and inspection equipment for the pipe on site is covered under machinery and equipment.

        What to require on delivery

        Standards are only as good as the paperwork that proves conformity. A purchase order for OCTG should state, as deliverables:

        • Mill inspection documents per heat, with chemical analysis and mechanical test results;
        • Hydrostatic test and non-destructive examination records for the ordered items;
        • Dimensional and tolerance reports covering outside diameter, wall thickness, straightness and length;
        • Thread gauging records to API 5B, including standoff, for every threaded end;
        • Marking and traceability — pipe marking that matches the certificates heat by heat;
        • Coupling and thread protector details, and the make-up torque values for the connection supplied.

        IB Group supplies to API, EN and GOST standards; the certification scope and documentation package for a given order are confirmed at the quotation stage, as part of the same technical review — and, on larger scopes, the same project management process — that fixes grade, wall and connector. Supply into operating plant works the same way, as in the pipeline and valve supply for the Heydar Aliyev Oil Refinery. Send the well or line data through the contact page and the technical team will respond with a specification.

        Frequently asked questions

        What is API 5CT?

        API 5CT, published in parallel as ISO 11960, is the specification for casing and tubing used in oil and gas wells. It defines grade groups and their chemistry, heat treatment, mechanical properties, dimensions and tolerances, hydrostatic testing, non-destructive examination and marking. Thread dimensions and gauging are not in it — they are in API 5B — and line pipe is API 5L. IB Group supplies OCTG to API 5CT in Ø10–406 mm, 5–25 mm wall, grades J55, K55, N80 and P110.

        What is the difference between API 5CT and API 5B?

        API 5CT governs the pipe: its grade, chemistry, mechanical properties, dimensions and testing. API 5B governs the connection: the dimensions of round and buttress thread forms and the gauging practice — master gauges, working gauges and standoff — used to accept or reject a cut thread. They are separate because a thread is a mechanical interface, not a material. A string of fully compliant 5CT pipe can still leak or gall if its threads were cut or gauged outside 5B tolerances.

        Is API 5L the same as API 5CT?

        No. API 5L is line pipe for transporting oil, gas and water; API 5CT is casing and tubing for the well itself. They use different grade systems, so an API 5L grade such as X65 and an OCTG grade such as N80 are not interchangeable, and an enquiry should name the standard along with the grade. IB Group supplies pipes manufactured in compliance with API 5L, EN and GOST, as well as OCTG to API 5CT.

        What does the number in J55 or P110 mean?

        The number is the specified minimum yield strength of the steel in ksi — thousands of pounds per square inch. J55 and K55 have a minimum yield of 55,000 psi, N80 of 80,000 psi and P110 of 110,000 psi. The letter identifies the grade family, meaning its chemistry, heat treatment and testing requirements, which is why J55 and K55 are distinct grades despite the same yield figure. Higher strength is not automatically preferable: it generally reduces toughness and sour-service tolerance.

        Do GOST 632-80 pipes meet API 5CT?

        They are a parallel system, not a translation. GOST 632-80 covers casing and couplings and GOST 633-80 covers tubing and couplings, with their own grade designations, testing regimes and tolerances, so no GOST grade is an automatic substitute for an API grade — equivalence tables are a starting point for discussion with the engineer of record. IB Group supplies GOST OCTG in Ø20–406 mm, 6–20 mm wall, grades X52, X56 and X65, with LTC or BTC connectors.

        Other articles

        Fish Plate in Railway: Function, Sizes, Weights and Steel Grades

        10 Sep 2026

        Fish Plate in Railway: Function, Sizes, Weights and Steel Grades

        What a fish plate in railway track does, how the double-headed section clamps a rail joint, 1R65 and 2R65 sizes and weights, EN versus GOST steel grades, and how to match a plate to your rail profile.

        Industrial Valves for Oil and Gas: Types, Standards and How to Specify Them

        07 Sep 2026

        Industrial Valves for Oil and Gas: Types, Standards and How to Specify Them

        Which valve family fits which duty, how pressure and temperature decide between carbon and stainless steel bodies, what API 6D, EN 12516, EN 593 and GOST 33259 govern, and the checklist to send with an enquiry.

        Oil and Gas Piping Supply: How to Choose the Right Pipe

        07 Sep 2026

        Oil and Gas Piping Supply: How to Choose the Right Pipe

        Six pipe families, three standard systems and one purchase order. A practical guide to oil and gas piping supply — boiler, OCTG, seamless, coated and insulated pipe — and what a complete enquiry must state.